manualshive.com logo in svg

Toshiba T2150CD Series, Руководство пользователя, Страница: 109 / 179

Поделиться
Скачать
Toshiba T2150CD Series Скачать руководство пользователя страница 109

indicate which is for the top connector (left button) and which is for the bottom 
connector (right button).

5.

Close the cover.

6.

Small flaps in the cover open for each card installed (upper and/or lower) if the card 
needs to be accessed by, for example, a communication line to a modem or Ethernet 
adapter. If you need to access the card, simply open the corresponding flap.

Figure 12-3 The card's slot cover

After installing the card, check the configuration in the T2150CD series computer’s TSETUP 
program to make sure it is appropriate for your card. Refer to the 

Card Manager User's 

Guide

 and to your card’s documentation for setup information.

Removing the PCMCIA Card

To remove the PCMCIA card, follow the steps below.

NOTE

Before you remove the PCMCIA card, make sure the computer is 
in boot mode.

1.

Turn off the computer.

2.

Open the slot cover.

3.

Press the eject button for the card you want to remove. The card will pop out slightly.

4.

Grasp the card and pull it out.

Figure 12-4 Removing the PCMCIA card

Содержание T2150CD Series




















































































































































































Отзывы:

Нет отзывов