Toshiba Surveillix XVSv16-240-X, Руководство пользователя

Страница: 57 / 122

32861AA 57
ALARMS / SENSOR
Use the Alarms/Sensor menu to configure your alarms, sensors, and relays. To access the Alarms/Sensors Setup screen, click Setup on
the Live screen, and then click Alarms/Sensor .
Alarms
Intensive on Recording – Enable this function to increase the frame rate and resolution for a camera if an alarm or sensor is activated,
or if motion is detected.
Video Loss Alarm – Determine how the recorder will respond if a camera channel loses video. The recorder can beep, the loss can be
added to the System Log, or you can activate an external alarm.
Login Failure – Enable this function for the recorder to beep continuously in response to a failed login attempt. Only an authorized login
will stop the beeping.
Note If Video Loss Alarm is enabled, do not use Control Output 16 for other purposes. (For 8-channel models, do not use Control
Output 8 for other purposes.)
Sensors
Configure Sensors
1. Double-click a Sensor Name , and then type an appropriate name for your alarm sensor.
2. Double-click Type , and then select the contact type for this alarm, Normally Open ( N0 ), or Normally Closed ( NC ).
3. Double-click Relay , and type the time, in seconds, you want to elapse between the detection of the sensor and when the alarm
is activated.
4. Click Apply to save your settings.
Activate PTZ Preset
Use this function to activate a PTZ camera to move to a preset position when a sensor event is detected.
1. Click Sensor / Preset .
2. Select the camera Channel you want to configure.
Note The camera channel must be a PTZ camera.
3. Select the appropriate Sensor .
4. Select the appropriate Preset position for the camera to move to when the selected Sensor is activated.
Note The preset positions must be configured on your camera. Refer to the camera manual for instructions.
5. Click Set .
6. Select a different Sensor and Preset combination, and then click Set .
7. Repeat for all of your desired sensors.
8. To delete a Sensor-Preset combination, select the combination in the list, and then click Delete .
9. Click OK .
10. Click Apply to save your settings.