Toshiba SureMark 4610 2CR Скачать руководство пользователя

Страница: 63 / 70

Battery return program

This product may contain sealed lead acid, nickel cadmium, nickel metal hydride, lithium, or

lithium ion battery. Consult your user manual or service manual for specific battery information.

The battery must be recycled or disposed of properly. Recycling facilities may not be available in

your area. For information on disposal of batteries outside the United States, go to the Battery

disposal website or contact your local waste disposal facility.

For Taiwan:

Please recycle batteries.

For the European Union:

Notice: This mark applies only to countries within the European Union (EU)
Batteries or packaging for batteries are labeled in accordance with European Directive

2013/56/EU concerning batteries and accumulators and waste batteries and accumulators. The

Directive determines the framework for the return and recycling of used batteries and

accumulators as applicable throughout the European Union. This label is applied to various

. Notices

Содержание SureMark 4610 2CR







































































Результаты поиска

Содержание SureMark 4610 2CR

Отзывы:

Похожие инструкции для SureMark 4610 2CR

Бренды по названию

Популярные бренды

Toshiba SureMark 4610 2CR, Руководство по оборудованию

Результаты поиска

Содержание SureMark 4610 2CR

Отзывы:

Похожие инструкции для SureMark 4610 2CR

Бренды по названию

Популярные бренды