Toshiba Strata AirLink DK40i, Руководство по установке и обслуживанию

Страница: 60 / 724

DK40i Configuration
Worksheet 1 – System PCB Assignment Guide
2-12
Strata DK I&M 6/00
Base Cabinet Port/Line Capacity Check
Base and Expansions Cabinet Port/Line Capacity Check
Use to Table 2-13 make sure that the capacity of ports and/or lines is not exceeded. If a PCB
causes the ports or lines capacity to be exceeded, that PCB will not function. Refer to Tables
2-11 ~ 2-14 when filling in Table 2-13 to determine the DK40i Expansion Capacity.
Table 2-11 Strata DK40i Base Cabinet Station Port Configuration
Installed (Yes/No) PCB Type Port Type Port Total
Yes Motherboard Digital Telephone (8 ports) 8
KSTU2 Standard Telephone (4 ports)
TBUU or TBSU circuit #1 ISDN station side (2 ports)
TBUU or TBSU circuit #2 ISDN station side (2 ports)
Total Base Ports (16 ports max.) =
Table 2-12 Strata DK40i Base Cabinet Line Configuration
Installed (Yes/No) PCB Type Number of Line Types Line Total
TCOU Loop start (4 lines)
TDDU Direct Inward Dial (4 lines)
TBUU or TBSU circuit #1 ISDN line side (2 lines)
TBUU or TBSU circuit #2 ISDN line side (2 lines)
Total Base Lines (4 lines max.) =
Table 2-13 Strata DK40i Base and Expansion CO Line Configuration
Expansion
Slot No.
PCB
Installed
Port Type or Line Type Ports Lines
15
16
17
18
Total Ports and Lines in Expansion slots (15~18)
(from
Table 2-14 )
Total Base Unit ports and lines
(from
Tables 2-11 and 2-12 )
Total DK40i Base/Expansion ports and lines
(28 ports/12 lines max.)