background image

4

Additional Safety Instructions

18. If  the  apparatus  should  emit  smoke  or  an  unusual  odor, 

immediately disconnect the power cord from the wall outlet. 

Wait until the smoke or smell stops, then ask your dealer 

for a check and repair. Neglecting to do so may cause fire. 

19. During thunderstorms, do not touch the connecting cables 

or the apparatus. 

20. Warning: To prevent spread of fire, keep candles or other 

open flames away from this product at all times.

USA 

Federal Communications Commission Statement

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation 

is subject to the following two conditions: (1) This device may 

not cause harmful interference, and (2) This device must accept 

any interference received, including interference that may cause 

undesired operation.

Interference

This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential 

installation. This equipment generates, uses, and can radiate 

radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that 

interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference 

by one of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for 

help.

Bluetooth

®

 Wireless Technology and Your Health

The  products  with  Bluetooth

®

  wireless  technology,  like  other 

radio  devices,  emit  radio  frequency  electromagnetic  energy. 

The level of energy emitted by devices with Bluetooth

®

 wireless 

technology however is much less than the

electromagnetic  energy  emitted  by  wireless  devices  such  as 

mobile phones. 

Because products with Bluetooth

®

 wireless technology operate 

within the guidelines found in radio frequency safety standards 

and recommendations, TOSHIBA believes Bluetooth

®

 wireless 

technology is safe for use by consumers.

These standards and recommendations reflect the consensus 

of  the  scientific  community  and  result  from  deliberations  of 

panels and committees of scientists

who  continually  review  and  interpret  the  extensive  research 

literature.

In  some  situations  or  environments,  the  use  of  Bluetooth

®

 

wireless technology may be restricted by the proprietor of the 

building  or  responsible  representatives  of  the  organization. 

These  situations  may,  for  example,  include  in  any  other 

environment where the risk of interference to other devices or 

services is perceived or identified as harmful.

If  you  are  uncertain  of  the  policy  that  applies  on  the  use  of 

wireless devices in a specific organization or environment (e.g. 

airports), you are encouraged to ask for authorization to use 

the device with Bluetooth

®

 wireless technology prior to turning 

on the equipment.

21. CAUTION: Always use the TOSHIBA AC adapter that was 

provided with the product, or use AC adapters specified by 

TOSHIBA to avoid any risk of fire or other damage to the 

product. Use of an incompatible AC adapter could cause fire 

or damage to the product possibly resulting in serious injury. 

TOSHIBA assumes no liability for any damage caused by 

use of an incompatible adapter.

SBX5065KU_IB_R6.indd   4

2013/7/3   10:01:05

Содержание SoundStrip SBX5065KU





















Отзывы: