35
Function setup
4) Press “8888” using number buttons. (Please note, this
is presetting password of this unit). Then press ENTER.
Press ENTER again to list the parental level.
Enter Password:
Set Password
Parental Control
: 8. Adult
The parental lock level is equivalent to the following
ratings:
Level 1: Kid Safe
Level 2: G
Level 3: PG
Level 4: PG-13
5) Press / to select the rating from 1 to 8. Rating
one (1) has the most restrictions while rating eight
(8) can virtually playback all DVD software.
6) Press OPEN/CLOSE button to activate the Parental
Level setting.
Parental Control
DVDs equipped with the password function are rated
according to their content. The contents allowed by a
parental lock level and the way a DVD can be controlled
may vary from disc to disc.
For example, if the disc allowed, you could edit out
violent scenes unsuitable for children and replace them
with more suitable scenes, or you could lock out
playback of the disc altogether.
• DVDs may or may not respond to the parental lock
settings. This is not a defect in the DVD player. Make
sure this function works with your DVDs.
DVD
1) Press SETUP button.
2) Press / to select Rating.
3) Press button to select Parental Control, then
press ENTER button. “Enter Password” screen will
appear.
If the DVD has been designed to temporarily cancel
the Parental Level, the screen will change
depending on which disc is played. If you select
“YES” with the ENTER button, “Enter Password”
screen will appear. Input the 4-digit password as
you have set then followed by ENTER button and
playback will start. If “NO” is selected, press the
OPEN/CLOSE to remove the disc.
Notes
• If you input a wrong password, press CLEAR button
and re-enter your 4-digit password again.
• You cannot play DVDs rated higher than the level
you selected unless you cancel the parental lock
function.
Set Password
New Password can be set to replace the default password.
1) Press SETUP button.
2) Press / button to select Rating.
3) Press button, then use the / button to select Set
Password.
4) Press ENTER button. “Enter Password” screen will
appear.
5) Press the number buttons to input the current
password (If the password has not been set yet after
you purchase this unit, it is “8888”). Then press
ENTER.
6) Press ENTER button again, “New Password” screen will
appear. Press the number buttons to input the new
password.
7) Press ENTER button, “Confirm Password” screen will
appear. Enter the same password again for confirmation.
8) Press ENTER button. Now your new password has been
set. Be sure to remember this number!
If you forget the password, you can erase your
current password by pressing number button 8
on the remote control four times, then press ENTER
button to confirm the setting.
PASSWORD: 8888
DVD
Level 5: PG-R
Level 6: R
Level 7: NC-17
Level 8: Adult
Misc
Use Default Settings
If you want to return the initial language setting such as
Language, Video, Audio and etc. to the factory default, do
the following:
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button to select Use Default Settings, then
press ENTER button.
4) Press / button to select “Yes”, then press ENTER
button. The original setting will be restored.
Note
When you reset the DVD player to the factory default, the
DVD player will take 3-5 seconds to reset.
Screen saver
: On
HDMI CEC
: Off
Screen saver
: On
Do you want to use default setting?
