Toshiba SD1020KB, Руководство пользователя

Страница: 4 / 17

English
4
(Pb), mercury (Hg), and/or cadmium (Cd) defined
in the Battery Directive (2006/66/EC), then the
Pb,Hg,Cd
chemical symbols for lead (Pb), mercury (Hg) and/
or cadmium (Cd) will appear below the crossed
out wheeled dust bin symbol. By participating
in separate collection of batteries, you will help
to assure the proper disposal of products and
batteries and thus help to prevent
potential negative consequences for
the environment and human health.
Fo r m o r e d e t a i l e d i n fo r m a t i o n
about the collection and recycling
programmes available in your country,
please visit our website ( http://
www.recycle-more.co.uk/ ) or alternatively,
please contact your retailer where the product
was purchased.
General Information
This appliance may be fitted with a non-rewireable
plug.
If it is necessary to change the fuse in a non-
rewireable plug the fuse cover must be refitted. If
the fuse cover is lost or damaged, the plug must
not be used until a replacement available from the
appliance manufacturer is obtained. If the plug
has to be changed because it is not suitable for
your socket, or becomes damaged, it should be
cut off and an appropriate plug fitted following
the wiring instructions below.
The plug removed must be disposed of safely as it
is hazardous if inserted into a live socket.
IMPORTANT
The wires in this mains lead are coloured in
accordance with the following code:
BLUE: NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of
this unit may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire that is coloured blue must be connected
to the terminal in the plug which is marked with
the letter N or coloured black.
The wire that is coloured brown must be
connected to the terminal which is marked with
the letter L or coloured red.
Do not connect either wire to the earth terminal
which is marked by the letter E or by the safety
earth symbol or coloured green or green-and-
yellow. Use a 5A BS1362 fuse which is approved
by ASTA or BSI. Always replace the fuse cover
after changing the fuse.
The symbol for CLASS II (Double Insulation)
Copyright notice
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.