Toshiba SD-P2600, Руководство пользователя

Страница: 69 / 96

69
Function setup
Audio
Dynamic Range Control
Karaoke Vocal
Audio Out Select
PCM Down Sampling
Bitstream
Off
On
Off
AB C
PCM Down Sampling
DVD-V DVD-A
Make this selection only when you use your audio
equipment (e.g. receiver) connecting to the player via
the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack.
According to performance of your connected receiver,
select a sound processing option for playback of a
disc that contains high frequency signals (sampling
frequency 96 kHz or 88.2 kHz).
On: Select when your connected receiver does not
conform to high frequency signals of 88.2 kHz or
higher.
The player outputs these signals in a disc
depressing the frequencies to 48 kHz or 44.1
kHz.
Off: Select when your connected receiver conforms
to high frequency signals of 88.2 kHz or higher.
The player outputs these signals in a disc as
they are.
Notes
• Regardless of this setting, the player outputs high
frequency signals in a copyright protected disc,
depressing to 48 kHz or 44.1 kHz; and outputs those of
176.4 kHz or 192 kHz in a disc with no copyright
protection, depressing to 88.2 kHz or 96 kHz.
• If you select “Off” while your connected receiver does
not conform to high frequency signals of 88.2 kHz or
higher, you cannot hear output sound of those signals.
Audio Out Select
DVD-V VCD DVD-A CD
Select the output sound format corresponding to your
system connection.
For details of sound recording systems, see
49
.
Bitstream: Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
MPEG1 or MPEG2 decoder.
82 83
The player outputs digital audio
information in the bitstream format
when you play a DVD video disc
recorded on the Dolby Digital, DTS,
MPEG1 or MPEG2 recording system.
PCM: Select when connected to a 2 channel
digital stereo amplifier.
84
The player outputs sounds in the PCM
2ch format when you play a DVD video
disc recorded on the Dolby Digital,
MPEG1 or MPEG2 recording system.
Note
When you make a connection to a TV, or Dolby Pro
Logic or stereo system via the analog audio jacks, select
“Bitstream” or “PCM.”