Toshiba SD-P1000, Руководство пользователя

Страница: 48 / 59

49
Connections
Warning
• When you are connecting (via the BITSTREAM/PCM jack) an AV decoder that does not have the Dolby Digital, Digital
Theater Systems (DTS) or MPEG2 decoding function, be sure to set “Audio Out Select” to “PCM” from the on-screen
displays
34 39
. Otherwise, high volume sound may damage your hearing as well as the speakers.
• When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog
stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the AV OUT jack
of the player is connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1
channel DTS Digital Surround™ decoder system must be connected to the BITSTREAM/PCM jack of the player.
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs with dynamic
realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder
or MPEG2 audio processor.
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
amplifier equipped with a digital audio input and speaker system (right and left front
speakers).
Notes
• DO NOT connect the BITSTREAM/PCM jack of the player to the AC-3 RF input of a Dolby Digital Receiver. This input on
your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM jack of the player.
• Connect the BITSTREAM/PCM jack of the player to the “COAXIAL” input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• The output sound of the player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening
level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the player’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
• Use DVD video discs encoded via
the MPEG2 recording system.
• Make the following setting.
On-screen display Select: Page
“Bitstream” “Audio Out Select”
Recording system MPEG
• Make the following setting.
On-screen display Select: Page
“PCM” “Audio Out Select”
Amplifier equipped with an
MPEG2 audio decoder
Amplifier equipped with a
digital audio input
To BITSTREAM/PCM
To BITSTREAM/PCM
To digital audio input
(coaxial)
34
39
31
To digital audio input
(coaxial)
34
39
VOLUME
/ REMOTE AV IN AV OUT BITSTREAM/PCM
Digital cable (supplied) 75
Ω
coaxial cable
(not supplied)
VOLUME
/ REMOTE
AV IN AV OUT BITSTREAM/PCM
Digital cable (supplied) 75
Ω
coaxial cable
(not supplied)