background image

42

Subtitles/To turn off the PBC/Disc status

To turn off the subtitle, press SUBTITLE
until “Off” appears.

• The on screen display will disappear after a few

seconds.

1

Notes:

• Depending on the DVD, you may not be able to

change subtitles, or to turn subtitles on or off.

• While playing a DVD, the subtitle may change

when you open or close the disc tray.

• In some cases, a selected subtitle language may

not be changed immediately.

Subtitles

When playing back a disc recorded with subtitles, you
can select the subtitle language or turn the subtitle off.

Press SUBTITLE repeatedly during play-
back until the desired language is selected.

2

To turn off the PBC 

(see page 6)

Press 

/

 to select “Mode”, then press

ENTER repeatedly until “Off” appear.

1

Press PLAY MODE in the stop mode.

2

Press PLAY MODE again to clear the screen.

3

Follow the above steps 1~2, then press 

ENTER

repeatedly until “PBC” appear.

To turn on the PBC

1/5 Eng

Off

1

— — —

2

— — —

3

— — —

Play Mode

Repeat

: Off

Program Playback

Mode

: Off

With each press of DISPLAY, the status of the disc
will appear on the screen and change as follows.

Disc status

CHAPTER
NO.

DVD

   

00:15:25   01:41:39

Title 1/3

 Chapter 2/24

1/1 Eng Dolby Digital

1/2 Eng

1/1

ELAPSED
TIME

ANGLE NO.

DISC OPERATION

TITLE NO.

TOTAL
TIME

AUDIO LANGUAGE

A KIND OF AUDIO

SUBTITLE LANGUAGE

VCD

   

00:08:32  00:51:03

Track 3/15

DISC OPERATION

TRACK NO.

ELAPSED
TIME

TOTAL
TIME

[Video CD]

[DVD]

  2J50101A [EN] P41-48

27/2/06, 5:40 PM

42

Содержание SD-37VBSB





























































Отзывы: