Toshiba SD-170EKB2, Руководство по обслуживанию

Страница: 6 / 37

1-3
All output voltages on the power board is 0V or deviated.
No
No
No
Yes
No
U1(PIN 8 - Drain waveform)
Replace F1
Replace C1&C2 if D1, D2, D3, D4 are
normal.
Check/ replace U1.
Check whether U1 are eroded.
All output voltages on
the power board is 0V or
deviated
Check if +5V, , +12V and
-12V are short.
Check whether the components in the
short-circuit voltage are defected or eroded.
Yes
Yes
Yes
Yes
U1(PIN 3 - RC waveform)
Check whether
F1 is blown
Trouble shooting chart
Check whether
there is 300V on C1
Check whether 100KHz
oscillating signal on Pin6 of
U1