Toshiba SD-1600 Скачать руководство пользователя страница 71

Страница: 71 / 125

1-3-4. Sub Chassis (with a pickup mechanism)

1. Turn the mechanism chassis assembly (1) upside down.

2. Remove one screw (2) and release the boss “A” from the

claw. Then remove the sub chassis (3) (with the pickup
mechanism) by sliding in the arrow direction.

3. When mounting, perform the reverse order of the

removal.

Note:

• When mounting the sub chassis (3) (with the pickup

mechanism), first, insert the boss “C” along the groove
of the cam slider up/down cam (4) and next, the boss

“B” and “A”.

• The boss “A” may be used with washers. (One or two

washers are used to prevent from the slust rattling. In

some cases, no washer is used.)

When the washer(s) is used, be sure to assemble as it

was without losing.

Fig. 2-1-16

1-3-5. Pickup Mechanism Assembly

<Removal>

1. Remove four screws (1) and then remove the pickup

mechanism assembly (2).

<Mounting>

1. Replace the pickup mechanism assembly (2) with a

new one.

2. When mounting, perform the reverse order of the

removal.

Fig. 2-1-17

Note:

• The dampers’ color differs when used for the front

side and the rear.

• When mounting the pickup mechanism assembly (2)

with the screws (1), push the pickup mechanism

assembly (2) downward without being caught and

tighten the screws (1).

Fig. 2-1-18

Pickup mechanism
assembly (2)

Screw (1)

Damper
(Black)

Damper
(Blue)

Damper

Screw (1)

Pickup mechanism
assembly (2)

Boss C

Boss A

Boss B

Claw

Screw (2)

Boss B

Boss A

Claw

Mechanism chassis
assembly (1)

Washers

Cam slider
up/down cam (4)

Groove

Sub chassis (3)
(with the pickup mechanism attached)

Содержание SD-1600






























































































































Результаты поиска

Содержание SD-1600

Отзывы:

Похожие инструкции для SD-1600

Бренды по названию

Популярные бренды

Toshiba SD-1600, Руководство по обслуживанию

Результаты поиска

Содержание SD-1600

Отзывы:

Похожие инструкции для SD-1600

Бренды по названию

Популярные бренды