Toshiba Satellite Pro U500, Руководство пользователя

Страница: 139 / 220

User ’s Manual 6-7
Power and Power-Up Modes
The Battery indicator may show a rapid decrease in battery operating time when
you try to charge a battery under the following conditions:
n
The battery has not been used for a long time.
n
The battery has completely discharged and been left in the computer for a
long time.
n
A cool battery is installed in a warm computer.
In such case, follow the steps below.
1. Fully discharge the battery by leaving it in the computer with the power on until
the power automatically shuts off.
2. Plug in the AC adaptor.
3. Charge the battery until the
Battery indicator glows blue.
Repeat these steps two or three times until the battery recovers normal capacity.
Leaving the AC adaptor connected will shorten battery life. At least once a
month, run the computer on battery power until the battery is fully discharged,
then recharge the battery.
Monitoring battery capacity
Remaining battery power can be monitored using the following methods.
n
Clicking the battery icon on the task bar
n
Via the Windows Mobility Center window
n
Wait at least 16 seconds after turning on the computer before trying to
monitor the remaining operating time. The computer needs this time to
check the battery’s remaining capacity and to calculate the remaining
operating time, based on the current power consumption rate and
remaining battery capacity. The actual remaining operating time may differ
slightly from the calculated time.
n
With repeated discharges and recharges, the battery’s capacity will
gradually decrease. Therefore, an often used, older battery will not
operate for as long as a new battery even when both are fully charged.