manualshive.com logo in svg

Toshiba Satellite A130, Руководство по обслуживанию

Поделиться
Скачать
Toshiba Satellite A130 Скачать руководство пользователя страница 198

3.

 

If the panel’s surface gets dirty or moist, wipe it with cotton or a soft cloth. If it is still 
dirty, try breathing on the surface to create a light condensate and wipe it again.  

If the surface is very dirty, we recommend a CRT cleaning agent. Apply the agent to a 
soft cloth and then wipe the panel’s surface. Do not apply cleanser directly to the panel. 

CRT
Cleaner

 

 

4.

 

If water or other liquid is left on the panel’s surface for a long period, it can change the 
screen’s tint or stain it.  Be sure to quickly wipe off any liquid. 

 

 

A-2

                                     

[CONFIDENTIAL]

 

Satellite A130/ A135 Series Maintenance Manual 

Содержание Satellite A130



















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды