manualshive.com logo in svg

Toshiba Satellite A130, Руководство по обслуживанию

Поделиться
Скачать
Toshiba Satellite A130 Скачать руководство пользователя страница 186

4  Replacement Procedures 

 

4-68 

 

Satellite A130/ A135 Series Maintenance Manual 

Installing the CPU 

To install the CPU, follow the steps below and refer to the figures in the preceding section. 

 

CAUTION:  If you remove the heat sink, use the CPU grease tool to remove the grease on 
the CPU and heat sink. Reapply fresh grease before installing the heat sink. 

 

1.

 

Make sure that the notch on the cam is aligned with the 

open

 position of the CPU slot. 

2.

 

Seat the CPU aligning the triangle mark on the CPU with the one on the CPU socket. Make 
sure the alignment is exact to avoid damaging pins on the CPU. 

3.

 

Press the CPU softly with your fingers to insert into the socket and turn the cam on the CPU 
socket to the 

closed

 position with a flat-blade screwdriver to secure the CPU. 

4.

 

Seat the fan module and secure with the M2.5x3 screw on the front side of the system board. 

5.

 

Attach the fan connector. 

6.

 

Seat the heat sink over the CPU and secure with four screws in the order indicated on the 
heat sink. 

Содержание Satellite A130



















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды