Toshiba SATELLITE 2750 Series, Руководство пользователя

Страница: 96 / 176

User's Manual TSETUP and Passwords 7-17
Version
1
Last Saved on 30/04/00 19:48
Satellite 2750/2770 User's Manual – Satellite 2750 UK.doc – ENGLISH – Printed on 30/04/00 as
IM_275UK
Supervisor password logon
The following restrictions apply to the user when you log on with a
supervisor password:
Instant security
User password will not provide access to the
computer.
The supervisor password will provide access to the computer from instant
security even if the user password was used to log on to the computer.
However, access will be limited to the user level.
How to set the passwords
This section describes how to set the supervisor and user password. User
password can be set using the Hardware Setup program.
You can use either capital or small letters to enter the password. Please
do not use any national specific characters.
Supervisor password
The SVPW program works only in the MS-DOS environment. SVPW is
stored in the Windows directory. To set the supervisor password, follow the
steps below.
1.
Go to the DOS prompt, type in SVPW , and press Enter .
2.
If the password has not been registered, the following line will be
displayed:
SUPERVISOR PASSWORD = Not Registered
Do you want to register the supervisor password
<Y/N>?
3.
Press Y to enter a password. The following line will be displayed:
Enter Password --->
4.
Enter a password of up to 10 characters. The character string you
enter is displayed as a string of asterisks. For example, if you enter a
password consisting of four characters, the display is shown as:
Enter Password ---> ****
5.
Press Enter . The following message appears, allowing you to verify
the password.
Verify Password --->