Toshiba Satellite 100CS, Руководство пользователя

Страница: 132 / 169

100CS 4-33
4.15 Liquid Crystal Display (LCD) Module
Removing the Color LCD Module
To remove the LCD module, follow the steps below and refer to figure 4-30.
1. Turn the computer off. Disconnect the AC power cord and all external cables
connected to the computer.
2. Remove the battery pack, optional memory module, optional PC card, display
mask and FL inverter board as described in sections 4.2, 4.3, 4.4, 4.13, and 4.14.
3. Remove
four M2.5x6 screws
securing the
LCD module
to the LCD cover. The
screw at the lower left also secures the ground cable.
4. Carefully rotate the
LCD module
from
right to left
out of the display cover and
disconnect the
display cable
from
CN1N
on the LCD module and from the
VGA
cable
in the computer.
Figure 4-28 Removing the LCD module
NOTE: Metal edges on the LCD module are sharp, so be careful not to cut
yourself.
Installing the Color LCD Module
To install the LCD module, follow the steps below and refer to figure 4-28.
1. Connect the
display cable
to
CN1N
on the
LCD module
and to the
VGA cable
,
then carefully rotate the LCD module into the LCD cover.
2. Secure
four M2.5x6 screws
and the ground cable on the
LCD module
.
3. Install the FL inverter board, display mask, optional memory module, optional PC
card, and battery pack as described in sections 4.14, 4.13, 4.4, 4.3, and 4.2.