Toshiba RD-97DTKB, Руководство по обслуживанию

Страница: 30 / 75

1-10-1 E2J70FIS
FUNCTION INDICATOR SYMBOLS
Note: If an error occurs, a message with the error number appears on the screen.
Message Solution
Error
No.
Error Description Priority
Can not record on this disc.
Insert a recordable disc, and
ensure the disc status satisfies
the recording requirements.
1 An error occurs during data reading. -
2
There is no reply for 15 seconds in Test
Unit Ready.
-
3
Cannot write the data after trying three
times.
-
4 An error occurs with OPC. -
5 During recovery in a record. -
6
An error occurs even if recovery has been
tried three times.
-
7 An error occurs in a format. -
8 It cannot start an encode. -
9
NV_PCK/RDI_PCK is not in encoded
data.
-
10
Encode Pause condition continued for 10
minutes.
-
11
Encode Pause condition continued in
normal REC condition for 10 minutes.
-
12
Difference in the address and cannot get
Stream ID of RDI/VIDEO.
-
13 It is a reply that “ATAPI is not readable.” -
14
Cannot write the data after recovering
SMALL VMGI.
-
15
Cannot write the data after DVD-R
Reverse Track.
-
16 An error occurs in Finalize Close. -
17 An error occurs in Rec Stop Close. -
18 An error occurs in PCA Full (DVD_R). -
19 Safety Stop occurs during editing. -
20 High Speed Disc. 2
21 The disc is not formatted. 5
22 Disc Error has occurred. 3
24
The disc except DVD-R/RW or finalized
DVD-R.
1
This program is not allowed to
be recorded. You cannot record copy-
prohibited programs.
25 During the Macrovision picture input. 11
26 During the CGMS picture input. 12
This program is not recordable
in Video mode. You cannot record copy-
prohibited programs.
27
During the CGMS picture input. (Video
Format Disc)
-
This program is not allowed to
be recorded on this disc. You cannot record cop-y
prohibited programs.
28
During the CGMS picture input. (VR
Format Disc)
-
This disc is protected and not
recordable.
Release the disc protection
setting in the Disc Setting
menu.
29 Disc Protected Disc. 6
Recording Error
You cannot record on this disc as
Power Calibration Area is full.
E35
Error No.
Error message