RBC-MTSC2 Mini Touch Screen Controller
Installation & Owner Manual
20
6.4.19. USB Configuration Mode (H/W rev. 8.0 and above)
This feature allows the MTSC2 to be powered up via a USB cable, to help simplify the process of
off-site configuration, and also allow the unit to be demonstrated without being connected to an
indoor unit.
This screen is displayed if the controller is only connected via USB.
At this point use the PC configuration software to setup the controller / download new images, or tap
the button to enter demonstration mode.
6.4.20. Demonstration Mode
The controller pretends to be connected to 2 indoor units, one with an active error, the other with an
active filter sign, and behaves as if it were connected to actual units.