– 3 –
2
Changing batteries
Loading batteries
1
Remove the battery cover.
2
Insert 2 new batteries (R03 [AAA])
following the (+) and (-) positions.
Removing batteries
1
Remove the battery cover.
2
Slap the batteries out lightly onto your
palm.
Batteries
• To replace the batteries, use two new batteries (R03
[AAA]).
• In normal use, the batteries will last about one year.
• Replace the batteries if there is no receiving beep from
the indoor unit or when the air conditioner cannot be
operated using the remote controller.
• To avoid malfunctions by battery leakage, remove the
batteries when not using the remote controller for
more than one month.
3
Adjusting clock
Setting the clock
Before you start operating the air conditioner, set the
clock of the remote controller using the procedures given
in this section. The clock panel on the remote controller
will indicate the time regardless of whether the air
conditioner is in use or not.
Initial setting
When batteries are inserted in the remote controller the
clock panel will indicate AM 0:00 and will flash.
1
TIMER
or
button
Push the TIMER or button to set the current
time.
Each push of the TIMER button changes the time in
one minute steps.
Pushing the TIMER button continually changes the
time in ten minute steps.
2
SET
button
Push the SET
button.
The current time is indicated and the clock starts.
Adjusting clock
1
CLOCK button
Push the CLOCK by tip of a pencil.
The CLOCK display flashes.
2
TIMER or button
Push the TIMER or button to set the current
time.
Each push of the TIMER button changes the time by
one minute.
Pushing the TIMER button continually changes the
time by ten minutes.
3
SET
button
Push the SET
button.
The current time is indicated and the clock starts.
A
C
L
CLR
SLEEP
SET
2
1
ON
OFF
ON
OFF
SET
SET
CLR
SLEEP
SET
3
2
1
ON
OFF
ON
OFF
SET
SET
3-EN
+EH99950501.BOOK Page 3 Thursday, June 18, 2015 10:57 AM
