background image

Owner’s Manual

2-EN

1

Safety Precautions

• Read these “Safety Precautions” carefully before using.
• The precautions described below include important items regarding safety. Observe them without fail.

Understand the following details (indications and symbols) before reading the body text, and follow the 
instructions.

• Keep this Manual at accessible place for future reference.

WARNING

Installation

Do not attempt to install the air conditioner yourself.

Ask your dealer or a contractor with specialized experience to install the air conditioner. Electric shocks and/or a fire 
may result if you attempt to install the air conditioner yourself and the air conditioner ends up not being installed 
perfectly.

Use only with the authorized air conditioner units.

Be absolutely sure to use only the authorized air conditioner units designated by the manufacturer.
Also, ask a contractor with specialized experience to install them. Electric shocks and/or a fire may result if you 
attempt to install the parts yourself and the parts end up not being installed perfectly.

Operation

Do not operate the buttons with wet hands.

Failure to heed this warning may result in electric shocks and/or trouble.

Do not get the control unit wet.

Take steps to avoid getting the control unit wet. Failure to heed this warning may result in electric shocks, a fire and/
or trouble.

If trouble (such as the smell of burning) has occurred, stop operation and turn off the main power switch.

Allowing operation to continue while the trouble has not been remedied may cause electric shocks, a fire and/or 
trouble. Consult your dealer.

Relocation

Do not undertake any repair work yourself.

Under no circumstances must you attempt to do any repair work yourself.
Instead, consult your dealer or a contractor with specialized experience. Electric shocks and/or a fire may result if you 
attempt to do repair work yourself and this work ends up not being carried out perfectly.

Consult your dealer when the control unit is to be relocated and re-installed.

Indication

Meaning of Indication

 WARNING

Text set off in this manner indicates that failure to adhere to the directions in the warning could result in 

serious bodily harm (*1) or loss of life if the product is handled improperly.

 CAUTION

Text set off in this manner indicates that failure to adhere to the directions in the caution could result in 

minor bodily injury (*2) or damage (*3) to property if the product is handled improperly.

*1: Serious bodily harm indicates loss of eyesight, injury, burns, electric shock, bone fracture, poisoning, and other 

injuries which leave aftereffect and require hospitalization or long-term treatment as an outpatient.

*2: Bodily injury indicates injury, burns, electric shock, and other injuries which do not require hospitalization or long-

term treatment as an outpatient.

*3: Damage to property indicates damage extending to buildings, household effects, domestic livestock, and pets.

Содержание RBC-AMTU31-E

































Отзывы: