Toshiba RBC-AMTU31-E, Руководство пользователя

Страница: 18 / 32

Owner’s Manual
17-EN
6
Application control

Power saving mode
The power saving mode saves energy by limiting the
maximum current which will effect heating or cooling
capacity that the unit can generate.
Push button during operation.
• The air conditioner enters power saving mode.
•
appears on the display.
Power saving mode will stay in effect until it is
cancelled.
To cancel the power saving mode, push
button again.
• disappears.

Performing settings of the
power saving mode
* When group control is performed in a complex
system, it is necessary to configure the settings for
each outdoor unit.
* This function is not available depending on the type
of unit connected.
1
Push button for 4 seconds or more
when the air conditioner is not working.
flashes.
Indicates “CODE No.” [ C2 ].
2
Select an indoor unit to be set by pushing
(left side of the button).
Each time the button is pushed, unit numbers
change as follows:
The fan of the selected unit runs.
3
Adjust the power save setting by pushing
buttons.
Each push of the button changes the power level
by 1% within the range from 100% to 50%.
*The factory default is 75%.
4
Determine the setting by pushing button.
5
Push button to complete the setting.
UNIT No.
1-1
UNIT No.
1-2
UNIT No.
1-3
UNIT No.
1-4
Setting of power level in
power saving mode