Toshiba RBC-AMS55E-EN, Руководство пользователя

Страница: 23 / 52

– 22 –
Owner’s Manual
EN
While setting the functions
When the central control is used (when the run and stop operation is prohibited)
• The Schedule timer cannot be set on the Follower remote controller when the dual remote controller system is used.
• Adjust the clock before setting the Schedule timer. (page 34)
• The time can be adjusted by the minute.
• The temperature can be set within the range from 18°C to 29°C. (The limited temperature range is applied if the Set
temp. range limit function is activated.)
• The operation mode for the Schedule timer is the mode selected last time when the air conditioning unit was used.
• When dual automatic mode is used, “--”, “ON”, “OFF”, and “Auto” can be selected for the operation mode.
If dual automatic mode is selected in the schedule timer settings, select “Auto”.
If “ON” is selected and operation is started in automatic operation mode, the cooling temperature set point and
heating temperature set point will be set automatically.
• The operation mode can be selected. For details, refer to “6. Setting timer operation mode” of “Field setting menu” in
the Installation Manual.

Condition setting
* Up to 8 different running patterns per day can be programmed.
1
Push the [
∧
] / [
∨
] button to select
“2. Condition setting” on the “Schedule
timer” screen.
2
Push the“
←

” [ F1]/
“ 
→
” [ F2] button to select
one of
○
1/2/3, then push the [ MENU]
button.

Push the “ Day” [ F1] button to
confirm the settings for each day.

Push the “ Next” [ F2] to confirm
the current settings. 8 different settings
appears.

Push the [ CANCEL] button to return to the
“Schedule timer” screen.
3
Push the [ MENU] button.
4
Push the [
∧
] / [
∨
] button to select
the day to set, then push the “
↓
”
[ F1] button.

Push the [ CANCEL] button to switch to the
“Unconfirmed check” screen.
5
Push the [
∧
] / [
∨
] button to select
“--”, “ON”, “OFF”, “Auto*”.

Select “ON” to change the operation start time
and the set temperature settings.

Select “OFF” to change the operation stop time
setting.

“--“ indicates that the item has not been set.
6
Push “
→
” [ F2] to select time
or temperature.

When “--“ is displayed, time or temperature
cannot be selected for that item.
7
Push the [
∧
] / [
∨
] button to set
time or temperature.
Schedule timer
1.Schedule timer
ON / OFF
2.Condition setting
Return Fix
3.Holiday setting
1 / 2/ 3
Day
Next
Schedule timer1 (1/3)
Next Day
Day : Monday
1. -- --:-- --°C
2. -- --:-- --°C
3. -- --:-- --°C
4. -- --:-- --°C
Return Set
Schedule timer1 (1/3)
Reset
Return Fix
Day : Monday
1. -- --:-- --°C
2. -- --:-- --°C
3. -- --:-- --°C
4. -- --:-- --°C
(1)