EN
EN
EN
EN
EN
EN
EN
5
To delete programs
TEMP.
PRESET
The individual program
1. Press
.
•
The day of the week and the program number is
displayed.
• Select the day to delete the program.
2. Press
to select the program number to be deleted.
3. Press
.
• ON or OFF timer will be cleared and the LCD will blink.
4. Press
to delete the program.
•
Press
while the LCD is blinking. The program has
now been deleted.
All programs
1. Press
.
•
The day of the week and the program number will be
displayed.
2. Press
and hold for 3 seconds.
•
All programs will be deleted and LCD displays current
operation.
Note:
Make sure the remote control receiving module on the air
conditioner receives the signal from the remote control.
Note:
1. Place the remote control where the indoor unit can receive
the signal. This will increase the accuracy of the timing
between the remote control and the air conditioning unit.
2. The ON/OFF timer can be set during the WEEKLY TIMER
operation. In this situation, the air conditioner will fi rst
follow the normal timer until it is complete; then, it will
return to the WEEKLY TIMER function.
3. During WEEKLY TIMER operation, all of operation such
as MODE, TEMP, FAN, Hi-POWER, ECO and etc., can be
adjusted but when the clock reaches the program setting,
the operation will return to the set items in the program.
4. When the remote control is sending a signal to the air
conditioner, avoid interference from objects that can block
the signal.
Edit WEEKLY TIMER program
TEMP.
PRESET
To edit the program after confi rming the weekly timer setting on
Page 4
, follow steps 1 - 3 below.
1. Press
.
•
The day of the week and the program number of the
current day will be displayed.
2. Press
to select the day of the week and press
to select program number to be confi rmed.
• Resetting the operation.
3. Press
to exit confi rming mode.
Deactivating WEEKLY TIMER operation
Press
while “WEEKLY” is displayed on the LCD.
• The “WEEKLY” indicator will disappear from the LCD.
However, the program will remain in the remote control.
• The TIMER lamp goes off.
• To reactivate the WEEKLY TIMER operation again, press
again, LCD shows the next program. The program,
after reactivation, is related to the clock time.
1112150109_01_EN.indb 5
2/11/58 BE 3:39 PM
