– 10 –
EN
EN
ID
19-EN
20-EN
CAUTION
• When you select the timer operation, the remote
controller automatically transmits the timer signal
to the indoor unit at the speci
fi
ed time. Therefore,
keep the remote controller in a location where
it can transmit the signal to the indoor unit properly.
Otherwise, the time lag of up to 15 minutes will
occur.
• If you do not press the SET
SET
button within 30
seconds after setting the time, the setting will be
cancelled.
Once you select the timer operation mode, the settings
are saved in the remote controller.
Thereafter, the air conditioner will start operating under
the same conditions when you simply press the ON /
OFF button of the remote controller.
If the clock display is flashing, you cannot set the
timer.
Follow the instructions in the section “Setting the
clock” and then set the timer.
◆
Combined timer (Setting both ON
and OFF timers simultaneously)
OFF timer —> ON timer
(Operation —> Stop —> Operation)
This feature is useful when you want to stop the air
conditioner after you go to sleep, and start it again in
the morning when you wake up or you return home.
Example:
To stop the air conditioner and start it again next
morning.
Operation
Operation again
Stop
▼
Setting combined TIMER
1
Press the OFF TIMER
OFF
button to adjust the
OFF timer.
2
Press the ON TIMER
ON
button to adjust the
ON timer.
3
Press the SET
SET
button.
ON timer —> OFF timer
(Stop —> Operation —> Stop)
You can use this setting to start the air conditioner
when you wake up and stop it when you leave the
house.
Example:
To start the air conditioner next morning and stop it.
Operation
Stop
Stop
▼
Setting combined TIMER
1
Press the ON TIMER
ON
button to adjust the
ON timer.
2
Press the OFF TIMER
OFF
button to adjust the
OFF timer.
3
Press the SET
SET
button.
• Either ON or OFF timer function which is closer to
the current time, is activated
fi
rst.
• If the same time is set for both ON and OFF timers,
no timer operation is performed.
Also, the air conditioner may stop operating.
◆
Every day combined timer
(setting both ON and OFF timer
simultaneously and activate
every day)
This feature is useful when you want to use combined
timer at the same time every day.
▼
Setting combined TIMER
1
Press the ON TIMER
ON
button to adjust the
ON timer.
2
Press the OFF TIMER
OFF
button to adjust the
OFF timer.
3
Press the SET
SET
button.
4
After step 3, an arrow mark ( or )
fl
ashes for about 3 seconds and during this
fl
ashing, press the SET
SET
button.
•
During the every day timer is activating, both arrows
( ,
) are indicated.
◆
Cancel the timer operation
Press the CLR
CLR
button.
◆
Clock display
During the TIMER operation (ON-OFF, OFF-ON, OFF
timer) clock display is disappeared so as to show
the setting time. To see the present time, press SET
button briefly and the present time is displayed about
3 seconds.
■
High power operation
◆
High power (Hi POWER)
The Hi POWER (high power operation) mode
automatically controls room temperature, airflow and
operation mode so that the room is quickly cooled in
summer and warmed in winter.
PRESET
QUIET
SWING
FIX
Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
1
◆
Setting Hi POWER mode
1
Hi-POWER
button
Press the Hi-POWER button after starting any
operation. At the same time, the “Hi POWER”
mark on the remote controller is indicated.
◆
Cancelling Hi POWER mode
1
Hi-POWER
button
Press the Hi-POWER button once again.
At the same time, the “Hi POWER” mark on the
remote controller goes out.
CAUTION
• The Hi POWER mode cannot be activated in the
DRY and FAN ONLY operation and when the ON
TIMER operation is reserved.
• Hi POWER mode is not available for group control.
When Hi POWER is transmitted to the Header
indoor unit, the receiving sound is heard but the
Hi POWER mode will not be performed. Please
cancel the Hi POWER mode.
1111056504_EN.indd 10
1111056504_EN.indd 10
9/22/57 BE 3:39 PM
9/22/57 BE 3:39 PM
