20-EN
19-EN
– 10 –
EN
For fan
The louver can be adjusted to six steps.
Select a wind direction.
Auto swing
The SWING indicator is displayed and the louver
begins swinging.
Repeat
5
Temperature selection
Press the set button to adjust the temperature.
• Temperature setting range is from 18.0
°
C to
29.0
°
C
• The sensitivity of temperature adjustment is
0.5
°
C.
8°C operation (For object pre-heating)
The air conditioner can control the heating temperature to about 8°C in the heating mode.
The 8°C heating operation requires settings with the wired remote controller. Ask the installer or dealer for the settings
according to the installation manual of the indoor unit.
Start
1
Set the displayed temperature to 18°C in the heating mode by pushing TEMP.
button.
2
Set the displayed temperature to 8°C by pushing TEMP.
button for at least four seconds.
Stop
1
Set the displayed temperature to 18°C by pushing TEMP.
button.
•
The air conditioner returns to the normal Heat mode. Select a desired temperature and operation mode.
NOTE
•
The discharged air temperature is lower than that in the normal heating operation.
•
The room temperature may not be heated evenly depending on the remote controller installation location.
•
The room temperature may not reach 8°C depending on the room size or the installation conditions.
•
Setting for fan speed is available during the 8°C heating operation.
The 8°C heating operation is cancelled in the following cases.
•
When operation is stopped with
button
•
When another operation mode is selected with
button
•
When temperature setting or operation mode is changed or operation is started / stopped by the wireless remote controller
or the central control remote controller.
•
When this operation mode is used, observe proper operating hours and periodic maintenance by service staff is
recommended.
4
Timer
operation
4.1 Timer off Operation
Timer off: When reaching the setting time, the indoor unit stops running.
1
Timer off button
Press the timer off button in process of air conditioner operation.
• The and
light, while
and timing indication icon
fl
icker.
2
Select the timer off time
Press the set button to set the time.
• Increase in accordance with the law of 0.5 hour(30 minutes), 1 hour, 2 hours ..., it can be up to 24 hours.
• If you do not operate the button within 30 seconds, the timer off setting will be canceled.
3
Press the timer off button
The
disappears and the timer off indication icon changes from
fl
ickering to normally on, then the timer off
function starts.
When running the shutdown timer, the timing indication is displayed in the form of countdown.
■
Cancel timing
1
Press the timer off button.
The timing indication icon disappears.
NOTE
• When the shutdown timer is running, it will continue to run even if the air conditioner is turned on or off via the
on/off button.