16-EN
15-EN
– 8 –
EN
3
Part names and functions of the remote
controller
Remote controller model name: RBC-ASCU1
LCD back-light lights for 15 seconds during remote controller operation.
All indicators are displayed in the display example below.
Actually, only the selected options will be displayed.
■
Operations
Operation lamp
Lights during operations.
Blinks when a check occurs or
the protective device activates.
1
2
3
4
1
ON/OFF button
Press the button to turn on the air conditioner, and press the button again to turn off the air conditioner.
2
Setting button
It is used for temperature setting in general conditions. In running mode, fan speed mode and wind direction
mode, it is used for the change of respective settings.
3
Timer off button
Set the timer off.
4
Menu button
It is used for the selection of the running mode, fan speed and wind direction.
Press of the button each time, then it will switch in the following order.
• In different modes of the indoor unit, the selection of fan speed or wind direction may be omitted.
Normal
Operation
Operation
mode
Fan
speed
Wind
direction
■
Indicators icon
All icons on the display are shown for this explanation. Operations are not accepted when “SETTING” is
fl
ashing.
2
3
4
5
6
7
11
8
9
12
1
10
1
Running mode indication icon
Indicate the selected running mode.
2
Central control indication icon
It will be displayed when the air conditioner
is centrally controlled and used by a central remote
controller and other central control devices.
If the central control prohibits using the remote
controller,
will
fl
ash when pressing the
ON/OFF, mode or temperature button on the
remote controller, indicating that these buttons do
not work. (The settings that can be con
fi
gured on
the remote controller will vary depending on the
central control mode. For details, please read the
Owner’s Manual of the central remote controller.)
3
Setting indication icon
Indicate that the system is checking automatically
after the circuit breaker has been disconnected or
other conditions have occurred.
4
Repair indication icon
Display when performing an inspection or the
protective device is running.
5
Test run indication icon
Display during the test run period.
6
Temperature setting indication icon
Display the selected setting temperature.
7
Fan speed indication icon
• Indicate the selected fan speed.
Auto
Low
Low+
Med.
Med. +
High
Fix
8
OFF timer indicator
When a trouble occurs, a check code is displayed.
9
Pre-heat indicator
Displayed when the heating mode is energized or
defrost cycle is initiated.
While this indication is displayed, the indoor fan
stops or operate in fan mode.
10
Remote controller sensor indicator
Displayed while the sensor of the remote
controller is used.
11
Notice display
Displayed while notice code occurs.
For details, contact your dealer (distributor).
12
No function display
Displayed when the function requested is not
available on that model.
