Toshiba RAV-GP1101AT-E, Инструкция по эксплуатации

Страница: 86 / 96

- 85 -
„ Wiring between Indoor Unit and Outdoor Unit
The dashed lines show on-site wiring.
• Connect the indoor/outdoor connecting wires to the identical terminal numbers on the terminal block of each unit.
Incorrect connection may cause a failure.
For the air conditioner, connect a power wire with the following specifications.
„ Power and Wiring Specifications
* Number of wire
×
wire size
Model (RAV- Type) GP80 GP110 GP140
Power supply 1 to 50 Hz 220 - 240 V
Maximum running current 20.8 A 22.8 A 22.8 A
Recommended field fuse 25 A
Power wire*
2
×
2.5 mm
2
or more
(H07 RN-F or 60245 IEC 66)
Outdoor earth wire 1
×
2.5 mm
2
or more
Indoor/outdoor connecting wire*
(with earth wire)
4
×
1.5 mm
2
or more
(H07 RN-F or 60245 IEC 66)
2
1
3
2
1
3
Β
Α
N
L
Outdoor unit
Wired remote controller
Indoor unit
Circuit breaker
Input power
How to wire
1. Connect the connecting wire to the terminal as
identified with their respective numbers on the
terminal block of the indoor and outdoor units.
H07 RN-F or 60245 IEC 66 (1.5 mm
2
or more)
2. When connecting the connecting wire to the outdoor
unit terminal, prevent water from coming into the
outdoor unit.
3. Secure the power supply wire and indoor/outdoor
connecting wires using the cord clamp of the
outdoor unit.
4. For interconnecting wires, do not use a wire joined
to another on the way.
Use wires long enough to cover the entire length.
5. Wiring connections differ in conformance to
EMC standards, depending whether the system
is twin. Connect wires according to respective
instructions.
CAUTION
• Fuse must be used in installation for the power supply
line of this air conditioner.
• Incorrect/incomplete wiring may lead to an electrical
fire or smoke.
• Prepare an exclusive power supply for the air
conditioner.
• This product can be connected to the mains power.
Fixed wire connections:
A switch that disconnects all poles and has a contact
separation of at least 3 mm must be incorporated in
the fixed wiring.
Wiring diagram
* For details on the remote controller wiring/installation,
refer to the Installation Manual enclosed with the
remote controller.
Single system
Simultaneous twin system
Remote controller
Remote controller wiring
Indoor side
Indoor/outdoor connecting
wires
Outdoor side
Power supply
A B
1
1
2
2
3
3
N L
A B
1 2 3
A B
1
1
2
2
3
3
N L
Remote controller
Remote controller
wiring
Indoor side
Indoor/outdoor
connecting wires
Outdoor side
Power supply
Indoor
side
Remote
controller
inter-unit
wiring
Indoor power
inter-unit
wiring
EN-169 EN-170