Toshiba RAV-GM561ATJP-E Скачать руководство пользователя страница 25

Страница: 25 / 27

48-EN

47-EN

– 24 –

Declaration of conformity

Manufacturer:

TOSHIBA CARRIER (THAILAND) CO., LTD.

144 / 9 Moo 5, Bangkadi Industrial Park, Tivanon Road, Tambol Bangkadi,
Amphur Muang, Pathumthani 12000, Thailand

TCF holder:

TOSHIBA CARRIER EUROPE S.A.S
Route de Thil 01120 Montluel FRANCE

Hereby declares that the machinery described below:

Generic Denomination: Air Conditioner

Model / type:

RAV-GM561ATP-E
RAV-GM561ATJP-E
RAV-GM801ATP-E
RAV-GM801ATJP-E

Commercial name:

Digital Inverter Series Air Conditioner

Complies with the provisions of the Machinery Directive (Directive 2006/42/EC) and the regulations transposing
into national law

NOTE

This declaration becomes invalid if technical or operational modi

cations are introduced without the

manufacturer’s consent.

To Fix the Fluorinated
Greenhouse Gases Label

This product contains

uorinated greenhouse gases.

Do not vent gases into the atmosphere.

Contains

uorinated greenhouse gases

•

Chemical Name of Gas

R32

•

Global Warming Potential (GWP) of Gas

675

CAUTION

1. Stick the enclosed refrigerant label adjacent to the

service ports for charging or recovering location and
where possible adjacent to existing nameplates or
product information label.

2. Clearly write the charged refrigerant quantity on the

refrigerant label using indelible ink. Then, place the
included transparent protective sheet over the label
to prevent the writing from rubbing off.

3. Prevent emission of the contained

uorinated

greenhouse gas. Ensure that the

uorinated

greenhouse gas is never vented to the atmosphere
during installation, service or disposal. When any
leakage of the contained

uorinated greenhouse

gas is detected, the leak shall be stopped and
repaired as soon as possible.

4. Only quali

ed service personnel are allowed to

access and service this product.

5. Any handling of the

uorinated greenhouse gas

in this product, such as when moving the product
or recharging the gas, shall comply under (EU)
Regulation No.517/2014 on certain

uorinated

greenhouse gases and any relevant local
legislation.

6. Periodical inspections for refrigerant leaks may

be required depending on European or local
legislation.

7. Contact dealers, installers, etc., for any questions.

Fill in the label as follows:

1003003201

Pre-charged refrigerant
at factory [kg], speci

in the nameplate

Additional charge on
installation site [kg]

GWP × kg

1000

Содержание RAV-GM561ATJP-E




























Результаты поиска

Содержание RAV-GM561ATJP-E

Отзывы:

Похожие инструкции для RAV-GM561ATJP-E

Бренды по названию

Популярные бренды

Toshiba RAV-GM561ATJP-E, Руководство по установке

Результаты поиска

Содержание RAV-GM561ATJP-E

Отзывы:

Похожие инструкции для RAV-GM561ATJP-E

Бренды по названию

Популярные бренды