Toshiba RAD-X200H, Инструкция по эксплуатации

Страница: 29 / 32

Maintenance Tips
Main Body
·Wipe dust off the Power Plug regularly.
·Remove stubborn dirt with soft cloth and neutral kitchen detergent.
·Clean Control Panel only with a dry cloth, and use no water.
·Do not use gasoline, thinners, alcohol, cleansing powder, or brush to
prevent deforming or scratching the Unit.
1
Remove the Water Tank Lid.
Clean the interior and the Lid of the Tank. Pull out the Water Tank
from the Unit.
3
Do not brush the Tank to prevent scratches.
4
Wipe dry the exterior of the Water Tank, put
the Lid back on and insert the Water Tank into
the Unit.Press down the Water Tank Handle and
Lid to ensure proper installation.
Water Tank Lid
Water Tank Lid
Water Tank Handle
Water Tank Handle
Water Tank
5
Insert the Water Tank back into the Unit.
No Wet Hand
Unplugging
Do not plug in or unplug the Dehumidifier with wet hand.
Doing so could result in electric shock.
Turn off the Unit and unplug the power cord
before cleaning it to prevent electric shock.
Prohibited
Do not remove the Float from the Water Tank.
Doing so could result in inoperability, leakage,
dampening surrounding objects, electric shock, and electric leakage.
Use soft and slightly damp cloth to wipe the Unit.
2
Lift the Lid to open.
Float
Water Tank
Float
Water Tank
Warning
Caution
Hold the Water Tank horizontally and push it
inside gently to install the Tank.
13