Toshiba R6472 - DVD±RW Drive - IDE, Технические характеристики

Страница: 13 / 35

TS-L532A (SD-R6472) Rev.1.1
7 / 28
3.2.5. Shock
(1) Operating (Read) ---------------------------------no hardware error
14.7 m/s
2
[1.5 G] (Horizontal)
(Half sine wave 11 ms/10 s interval)
----------------------------------no
data loss
98 m/s
2
[10 G]
(Half sine wave 11 ms/10 s interval)
(2) Operating (Write) ----------------------------------no error
14.7 m/s
2
[1.5 G] (Horizontal)
7.8 m/s
2
[0.8 G] (Vertical)
(Half sine wave 11 ms/10 s interval)
(3) Non-operating (with no disc mounted) -------no damage
490 m/s
2
[50 G] (Half sine wave 11 ms)
980 m/s
2
[100 G] (Half sine wave 3 ms)
(4) Drop (Packaged)-----------------------------------no damage
(a) Bulk Package (50 units/1 package) 0.4 m drop once (bottom side only)
(b) Bulk package (20 units/1 package) 0.6 m drop once for each 6 surface,
1-edge and 1-corner
3.3. Installation Conditions
This drive can be installed horizontally within an angle of
±
15 degrees, and vertically within an angle of
30/15 degrees. Refer to Figure 1 for details.
Horizontal
Position Vertical Position
Figure 1 Mounting angle
3.3.1. Equipment
(1) When installing this drive, use the two M2-P0.4 tapping holes on each side.
(2) The opposite surface of the bearing surface (on which the drive is fixed) must be flat so that the
drive fits evenly.
(3) The length of the screws must be within the designated values so the screws do not go protrude.
Refer to Figure 3 for outside dimensions.
(4) When fixing the drive, apply equal torque to tighten the four screws. The recommended
tightening level is 0.2N m.
15
o
15
o
15
o
15
o
15
o
15
o
15
o
15
o
30
o
15
o