manualshive.com logo in svg

Toshiba Qosmio G10 Series, Руководство по обслуживанию, Страница: 238 / 392

Поделиться
Скачать
Toshiba Qosmio G10 Series Скачать руководство пользователя страница 238

4  Replacement Procedures

  

4.2  Battery pack

 

 

NOTE

:  Dispose of the used battery pack in accordance with the laws and ordinances of 

your local authority. 

Installing the battery pack 

The following describes the procedure for installing the battery pack (See Figure 4-1). 

CAUTION:

  There is a danger that the lithium ion battery pack may explode if not fitted, 

operated, handled, or disposed correctly. Dispose always the used battery 
pack in accordance with the laws and ordinances of your local authority. 
Use only the batteries approved by Toshiba. 

NOTE:

  Check visually the battery terminals and clean off any dirt with a dry cloth. 

1.

 

Turn off the power of the computer. 

2.

 

Disconnect the AC adapter and all external devices from the computer. 

3.

 

Attach the 

battery cover

 to the 

battery pack

. 

4.

 

Place the 

battery pack

 into the slot from the other side of the connector and insert it 

carefully. 

5.

 

Slide the 

battery lock

 to the lock position. 

QOSMIO G10  Maintenance Manual (960-497) 

 

4-9 

Содержание Qosmio G10 Series









































































































































































































































































































































































































Отзывы:

Нет отзывов