manualshive.com logo in svg

Toshiba Qosmio G10 Series, Руководство по обслуживанию, Страница: 17 / 392

Поделиться
Скачать
Toshiba Qosmio G10 Series Скачать руководство пользователя страница 17

1  Hardware Overview

  

1.1  Features

 

 

❑

 

Optical devices 

A DVD-ROM & CD-R/RW drive or DVD Super Multi drive is equipped.  

❑

 

Battery 

The RTC battery is equipped inside the computer. 
The main battery is a detachable lithium ion battery (4,400mAh:Li-Ion, 6cell). 

❑

 

USB (Universal Serial Bus) 

Four USB ports are provided. The ports comply with the USB2.0 standard, which 
enables data transfer speeds 40 times faster than USB1.1 standard. USB1.1 is also 
supported. 

❑

 

Bridge Media slot 

One SD card/Memory stick (PRO)/xDPicture card/MultiMedia card/SDIO card slot. 
Data can be read and written by inserting each media to the slot. Memory stick 
Duo/PRO Duo and memory stick adapter is not supported. 

❑

 

Sound system 

Harman/Kardon-made stereo speaker is equipped. An internal microphone, external 
monaural microphone connector, stereo headphone connector is also equipped. 

❑

 

Wireless LAN (Mini PCI slot)  

The wireless LAN is equipped on the mini PCI slot. 

❑

 

LAN/MODEM 

Connectors for LAN and Modem are separately mounted. 

❑

 

IEEE1394 port 

The computer has one IEEE 1394 port. It enables high-speed data transfer directly 
from external devices such as digital video cameras. 

❑

 

Bluetooth  

Depending on the model, the computer is equipped with a dedicated Bluetooth 
module. This enables a communication to devices that support Bluetooth  
Version 1.2/1.1/. Adopting AFH (Adaptive Frequency Hopping), reduce the 
interference with the wireless communication in 2.4GHz. It can be switched on or off 
with a switch on the computer.  

QOSMIO G10  Maintenance Manual (960-497) 

 

1-3 

Содержание Qosmio G10 Series









































































































































































































































































































































































































Отзывы:

Нет отзывов