Toshiba QOSMIO F20 Series Скачать руководство пользователя страница 224

Страница: 224 / 391

3 Tests and Diagnostics

3.31 SETUP

3-102

[CONFIDENTIAL]

QOSMIO F20 Maintenance Manual (960-526)

to move the cursor to the right and

to move the cursor to the left when you set the

date and time.
For the

Alarm Time

, set the time to turn on the power automatically. The “second”

cannot be set. When it is set to “Disabled”, the time to turn on automatically is not
set.

For the

Alarm Date Option

, set the date to turn on the power automatically.

When it is set to “Disabled”, the time to turn on automatically is not set.

NOTE:

1. Do not remove the AC adaptor and battery pack at the same time when you

use this feature. If you do so, data saved by the resume function will be lost.

You must also reset this option.

2. If you have set a password and the computer boots by the Auto Power On

function and hibernation is on, the computer will start with the instant

security function enabled. When the

password =

message is displayed, enter

the password to use the computer.

3. This option is enabled only once, the setting is reset, after booting up.

(d)

Diagnostic Mode

This option enables/disables the HW Diagnostic test function.

Disabled

Disables the HW Diagnostic test function. (Default)

Enabled

Enables the HW Diagnostic test function.

Configuration

This option lets you set the device configuration.

All Devices

BIOS sets all devices.

Setup by OS

Initializes devices, which is needed to load an operating
system. Operating system initializes other devices.

NOTE:

When using installed OS, selecting “Setup by OS” is recommended. But when

executing test programs, select “ALL Devices”.

Drives I/O

This option displays the address and interrupt level for hard disk drive and optical disk
drive. It is for information only and cannot be changed.

Built-in HDD

This cannot be changed.

Содержание QOSMIO F20 Series








































































































































































































































































































































































































Результаты поиска

Содержание QOSMIO F20 Series

Отзывы:

Похожие инструкции для QOSMIO F20 Series

Бренды по названию

Популярные бренды

Toshiba QOSMIO F20 Series, Руководство по обслуживанию

Результаты поиска

Содержание QOSMIO F20 Series

Отзывы:

Похожие инструкции для QOSMIO F20 Series

Бренды по названию

Популярные бренды