manualshive.com logo in svg

Toshiba PORTEGE R300, Руководство по обслуживанию

Поделиться
Скачать
Toshiba PORTEGE R300 Скачать руководство пользователя страница 130

3  Tests and Diagnostics 

 

3-10 

[CONFIDENTIAL] 

PORTEGE R300 aintenance Manual (960-591) 

7.

 

“

Create DMIINFO TXT (Y/N) ?

” is displayed. Press 

Y

,

 then the 

DMI information (text data) is written to the Floppy disk, etc. 

•

 

Setting of the HWSC 

•

 

Setting of the UUID 

•

 

Display of the DMI information (including UUID) 

 After completion of the above settings, H/W configuration & DMI 
information are appeared in order. Check the contents and press 

Enter

. 

Subtest 02 

DMI information save 

This is one of tools to copy the DMI information to a new PCB after 
replacing.  

This subtest saves all the DMI data in a floppy disk.  

Subtest 03 

DMI information recovery 

This is one of tools to copy the DMI information to a new PCB after 
replacing.  

This subtest writes all the DMI data in the floppy disk into the new PCB.  

NOTE:  Since the data of UUID is updated every time when this subtest, DMI information 

recovery, is done, the saved UUID data is not written. 

Subtest 04  

System configuration display 

 

 

 

 

This subtest displays the information of the system configuration. 

 

 

 

 

When the following message appears, confirm the contents and press 

Enter

.  

    Press 

[Enter] 

key 

For more details on the system configuration information, refer to “3.25 
System configuration”. 

Subtest 05  

E2PROM test (MAC/GUID/DMI) 

 It checks whether the MAC address, GUID of IEEE1394 and DMI 
information are written. 

Содержание PORTEGE R300

































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды