background image

202

If Something Goes Wrong

If you need further assistance

If you need further assistance

If you have followed the recommendations in this chapter and are 
still having problems, you may need additional technical assistance. 
This section contains the steps to take to ask for help.

Before you contact Toshiba

Since some problems may be related to the operating system or the 
program you are using, it is important to investigate other sources 
of assistance first.

Try the following before you contact Toshiba:

Review the troubleshooting information in your operating 
system documentation.

If the problem occurs while you are running a program, consult 
the program’s documentation for troubleshooting suggestions. 
Contact the software company’s technical support group for 
their assistance.

Consult the dealer from whom you purchased your computer 
and/or program. Your dealer is your best source for current 
information.

For the complete detailed specifications for your computer, visit 

pcsupport.toshiba.com

. Go to the Tech Support Center, select your 

particular model from the list and go to the Detailed Specifications 
for that model.

For the number of a Toshiba dealer near you in the United States, 
call: (800) 457-7777.

Contacting Toshiba

If you still need help and suspect that the problem is hardware-
related, Toshiba offers a variety of resources to help you.

Toshiba’s Technical Support Web site

For technical support, or to stay current on the most recent software 
and hardware options for your computer, and for other product 
information, be sure to regularly check the Toshiba Web site at

 

pcsupport.toshiba.com

.

Содержание Portege M405 Series


















































































































































































































































Отзывы: