Using the External DVD SuperMulti Drive
24
❖
Data written to a CD-R/DVD-R/DVD+R disc cannot
be deleted either in whole or in part.
❖
Data deleted (erased) from a CD-RW or
DVD-RW/+RW/-RAM disc cannot be recovered.
Check the content of the disc carefully before you
delete it. If multiple drives that can write data to discs
are connected, be careful not to delete data from the
wrong drive.
❖
In writing to a DVD-R/-RW, DVD+R/+RW or
DVD-RAM disc, some disc space is required for file
management, so you may not be able to write the full
capacity of the disc.
❖
Since the disc is based on the DVD standard, it might
be filled with dummy data if the written data is less
than about 1 GB. Even if you write only a small
amount of data, it might take time to fill in the
dummy data.
❖
DVD-RAM formatted by FAT32 cannot be read in
Windows 2000 without DVD-RAM Driver
Software.
❖
When multiple drives that can write data to discs are
connected, be careful not to write to the wrong drive.
❖
Be sure to connect the AC adaptor before you write
or rewrite.
❖
Before you enter standby/hibernation mode, be sure
to finish DVD-RAM writing. Writing is finished if
you can eject DVD-RAM media.
❖
Be sure to close all other software programs except
the writing software.
❖
Do not run software such as a screen saver, which
can put a heavy load on the CPU.
