Toshiba P47LSA, Руководство пользователя

Страница: 24 / 26

24
A Guide to Simple Problem Solving
Before calling service personnel, please check the following chart for a possible cause to the trouble you are
experiencing.
Symptom Check these things Page
No picture
．
Make sure the power cord is plugged in.
17
．
Maybe the power is Off or Standby.
17
．
Check whether the auxiliary equipment is connected.
14
．
Check the input setting is correct.
14
．
Signal may not be suitable.
14
The remote control does not
operate
．
Make sure the battery is inserted matching the + and – marks of
the battery compartment.
12
．
The battery may be exhausted.
12
．
Use the remote control aiming at the remote control sensor.
11
The picture color is pale, or not
clear
．
Check the picture quality adjustment.
19
．
If you are using YUV terminals, make sure cables are correctly
connected.
N/A
Factory default setting
Item Default Item Default
Power switch Off Color temp. User
Brightness 80 Red 225
Contrast 50 Green 225
Hue 0 Blue 225
Saturation 50 Language English
Flesh-tone Off Light Sensor Off
Gamma Correction Off Light Sensor Value 25
Auto Config On
Input signal selection and its contents
This page can be displayed by using [Down] key while
at the Main Menu page, appeared in page 21.
This page is convenient to check the incoming resolution
as indicated here as 1024x768@60Hz.
“IGP” is indicating that the input signal is coming from
Graphic card signal, as Input Graphic Processor.