background image

58

Function setup (DVD)

Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit 

28

.

If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the “Reading” screen will change, depending on
which disc is played. If you select “YES” with the
ENTER key, “Your disc exceeds the parental
control level#.” screen will then appear.

If you wish to cancel the set rating level tempo-
rarily, select “Parental Control Level” with 

 or

, then press ENTER. If the 4-digit password at

step 2 on page 57 has been set, the password
entering screen will appear as shown in step 4.
Alternatively, if the password has not been set,
playback will commence. If you don’t know (or
have forgotten) the password, select “Cancel
Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.

ENTER

/

RETURN

0–9

PLAY

OPEN/CLOSE

Temporary disabling of rating level by DVD disc

Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.

Note:

This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.

1

Enter the password with Number buttons (0–9).
Then press ENTER.

To exit from the entry, press 

RETURN

.

4

2

3

5

Your disc exceeds
the parental control level#.

Parental Control Level
Cancel Picture

/Enter/Return

   

   

 

 

Playback will commence if the entered
password was correct.

Reading

 5T40301A [E]p53-58

3/1/05, 10:19

58

Содержание MW20F11





































































Отзывы: