Toshiba MMY-SUG0801MT8P-E, Руководство пользователя

Страница: 12 / 21

5
OFF timer operation
OFF timer : The indoor unit stops when the set time is reached.
1,3 2
1
OFF timer button
Push the OFF timer button during air conditioning operation.
• “
” and “OFF” light and “SETTING” and timer indicator fl ash.
2
Select the OFF timer time
Push the setting button to set the time.
• The OFF timer time can be set to 0.5h (30 min), 1h, 2h,
up to 24h.
• If you do not push any button for 30s, the OFF timer setting will be cancelled.
3
Push the OFF timer button
“SETTING” disappears, the timer indicator changes from fl ashing to lighting, and the OFF timer starts.
• The timer indicator on the OFF timer operation is displayed with countdown.
■
Cancelling the timer
1
Push the OFF timer button.
The timer indicator disappears.
NOTE
• Even if air conditioning is turned on or off with the ON/OFF button during OFF timer operation, the OFF timer
operation continues.
6
Louver direction
NOTE
To improve the cooling / heating performance, change
the louver angle for each operation.
The characteristics of air: Cool air falls, and warm
air rises.
CAUTION
Point the louver horizontally during cooling
If pointing downward for cooling, dew may form on the
surface of the air discharge or louver and may drop
down.
NOTE
• If pointing horizontally for cooling, dew may form on
the surface of the cabinet or louver and may drop
down.
• If pointing horizontally for heating, the room
temperature may be uneven.
• Do not handle the louver manually.
• Doing so may cause a failure.
• Use the remote controller to adjust the angle.
‹
To set the louver direction and
auto swing
1
Push the Menu button several times and select
the wind direction mode to blink the wind direction.
Then, push the setting button several times to
display the louver direction as shown in the
fi gure
below.
• If you do not push any button for 30s, the wind
direction mode fi nishes.
T
For heating
The louver can be adjusted to six steps.
Point the louver downward. If not pointing
downward, hot air may not reach the
fl oor.
Initial (1) (2) (3) (4) (5) (6)
Swing
Operation mode Available directions
HEAT, FAN, (1) (2) (3) (4) (5) (6)
T
For cooling
The louver can be adjusted to four steps.
Point the louver horizontally. If pointing downward,
dew may form on the surface of the air discharge
port and may drop down.
Initial (1) (2) (3) (4)
Swing
Operation mode Available directions
COOL, DRY, (1) (2) (3) (4)
T
For fan
The louver can be adjusted to six steps.
Select a wind direction.
■
Auto swing
The SWING indicator is displayed and the
louver begins swinging.
Repeat
– 11 –
21-EN 22-EN