Toshiba MMF-AP0156H1-E, Руководство по установке

Страница: 21 / 26

– 20 –
L05 — — SIM Duplicated indoor units with priority (Displayed in indoor unit with priority) I/F
L06 L06 No. of indoor units with priority SIM
Duplicated indoor units with priority (Displayed in unit other than indoor unit with
priority)
I/F
L07 — — SIM Group line in individual indoor unit Indoor unit
L08 L08 — SIM Indoor unit group / Address unset Indoor unit, I/F
L09 — — SIM Indoor unit capacity unset Indoor unit
L10 L10 — SIM Outdoor unit capacity unset I/F
L17 L17 — SIM Outdoor unit type mismatch error I/F
L20 — — SIM Duplicated central control addresses Indoor unit
L26 L26 Number of heat storage units connected SIM Too many heat storage units connected I/F
L27 L27 Number of heat storage units connected SIM Error in number of heat storage units connected I/F
L28 L28 — SIM Too many outdoor units connected I/F
L29 L29 Number of IPDU (*1) SIM No. of IPDU error I/F
L30 L30 Detected indoor unit address SIM Indoor unit outside interlock Indoor unit
— L31 — — Extended I/C error I/F
P01 — — ALT Indoor fan motor error Indoor unit
P03 P03 — ALT Discharge temp. TD1 error I/F
P04 P04
01:Comp. 1 side
02:Comp. 2 side
03:Comp. 3 side
ALT High-pressure SW system operation IPDU
P05 P05
00:
01:Comp. 1 side
02:Comp. 2 side
03:Comp. 3 side
ALT
Phase missing detection / Power failure detection
Inverter DC voltage error (comp.)
Inverter DC voltage error (comp.)
Inverter DC voltage error (comp.)
I/F
P07 P07
01:Comp. 1 side
02:Comp. 2 side
03:Comp. 3 side
ALT Heat sink overheat error IPDU, I/F
P09 P09 Detected heat storage address ALT No heat storage unit water error Heat storage unit
P10 P10 Detected indoor unit address ALT Indoor unit overflow error Indoor unit
P12 — — ALT Indoor unit fan motor error Indoor unit
P13 P13 — ALT Outdoor liquid back detection error I/F
P15 P15
01:TS condition
02:TD condition
ALT Gas leak detection I/F
P17 P17 — ALT Discharge temp. TD2 error I/F
P18 P18 — ALT Discharge temp. TD3 error I/F
P19 P19 Detected outdoor unit number ALT 4-way valve inverse error I/F
P20 P20 — ALT High-pressure protective operation I/F
P22 P22
0*:IGBT circuit
1*:Position detective circuit error
3*:Motor lock error
4*:Motor current detection
C*:TH sensor error
D*:TH sensor error
E*:Inverter DC voltage error (outdoor unit fan)
ALT
Outdoor unit fan IPDU error
Note: Ignore 0 to F displayed in “*” position.
IPDU
P26 P26
01:Comp. 1 side
02:Comp. 2 side
03:Comp. 3 side
ALT G-TR short protection error IPDU
Check code Wireless remote controller
Check code name Judging device
Wired remote controller
display
Outdoor unit 7-segment display Sensor block display of receiving unit
Auxiliary code Operation Timer Ready Flash
39-EN 40-EN