Toshiba MMC-AP0158HP Series Скачать руководство пользователя страница 21

39-EN 

40-EN 

– 20 – 

8

1, 7

Slide 

Air intake grille 

fi

 xing knob 

Air 

fi

 lter 

 Air intake grille 

Air 

fi

 lter handle 

Air 

fi

 lter 

Air 

fi

 lter handle 

Air intake grille hook 

Air intake grille 

fi

 xing hook 

Air intake grille 

fi

 xing knob 

Air intake grille 

Air 

fi

 lter 

10

 Maintenance 

<Daily maintenance> 

Cleaning of air 

fi

 lter 

• If   is displayed on the remote controller, maintain 

the air 

fi

 lter. 

1

Push the 

 button to stop the operation, 

then turn off the circuit breaker. 

Periodic Maintenance 

•  For environmental conservation, it is strongly recommended that the indoor and outdoor units of the air 

conditioner in use be cleaned and maintained regularly to ensure ef

fi

 cient operation of the air conditioner. When 

the air conditioner is operated for a long time, periodic maintenance (once a year) is recommended. Furthermore, 
regularly check the outdoor unit for rust and scratches, and remove them or apply rustproof treatment, if 
necessary. 
As a general rule, when an indoor unit is operated for 8 hours or more daily, clean the indoor unit and outdoor unit 
at least once every 3 months. Ask a professional for this cleaning / maintenance work. Such maintenance can 
extend the life of the product though it involves the owner’s expense. 
Failure to clean the indoor and outdoor units regularly will result in poor performance, freezing, water leakage, and 
even compressor failure.

Inspection before maintenance 

Following inspection must be carried out by a quali

fi

 ed installer or quali

fi

 ed service person. 

Parts

Inspection method

Heat exchanger

Look through the air discharge port to check the part. Examine the heat exchanger if there 
is any clogging or damages.

Fan motor

Check if any abnormal noise can be heard.

Fan

Check if any abnormal noise can be heard.

Filter

Go to installed location and check if there are any stains or breaks on the 

fi

 lter.

Drain pan

Look through the air discharge port to check the part. Check if there is any clogging or drain 
water is polluted.

Maintenance List

Part

Unit

Check (visual / auditory)

Maintenance

Heat exchanger

Indoor / outdoor

Dust / dirt clogging, scratches

Wash the heat exchanger when it is 
clogged.

Fan motor

Indoor / outdoor

Sound

Take appropriate measures when 
abnormal sound is generated.

Filter

Indoor

Dust / dirt, breakage

• Wash the 

fi

 lter with water when it is 

contaminated.

•  Replace it when it is damaged.

Fan

Indoor

• Vibration, balance
•  Dust / dirt, appearance

•  Replace the fan when vibration or 

balance is terrible.

•  Brush or wash the fan when it is 

contaminated.

Air intake / 
discharge grilles

Indoor / outdoor

Dust / dirt, scratches

Fix or replace them when they are 
deformed or damaged.

Drain pan

Indoor

Dust / dirt clogging, drain 
contamination

Clean the drain pan and check the 
downward slope for smooth drainage.

Ornamental panel, 
louvres

Indoor

Dust / dirt, scratches

Wash them when they are 
contaminated or apply repair coating.

Exterior

Outdoor

•  Rust, peeling of insulator
•  Peeling / lift of coat

Apply repair coating.

3

Take out air 

fi

 lter. 

•  Push the handle of the air 

fi

 lter, and remove the 

hook of the air intake grille. Pull out the air 

fi

 lter 

toward you.

4

Cleaning with water or vacuum cleaner. 

•  If dust is heavy, wash it with tepid water 

including neutral detergent or water. 

•  After cleaning with water, dry it completely in the 

shade. 

5

Mount the air 

fi

 lter. 

6

Close the air intake grille. 

•  Close the air intake grille, and then 

fi

 x it securely 

while sliding knob closed side (CLOSE). 

•  Fix the screws of air intake grille 

fi

 xing knob on a 

side of each 

fi

 lter. 

7

Turn on the circuit breaker, then push the 

 button on the remote controller to start 

the operation. 

8

After cleaning, push  .

 display disappears. 

 CAUTION

•  Do not start the air conditioner while leaving air 

fi

 lter 

removed. 

• Push the 

fi

 lter reset button. (  indication will be turn 

off.) 

2

Open the air intake grille. 

•  Remove the screws of air intake grille 

fi

 xing 

knob on a side of each 

fi

 lter. 

•  Slide the air intake grille 

fi

 xing knobs (two 

positions) toward the arrow direction (OPEN), 
and then open the air intake grille. 

Содержание MMC-AP0158HP Series






























Отзывы: