ELECTRICAL ADJUSTMENTS
D-3
2-9: TRAPEZIUM
1.
2.
3.
4.
5.
6.
7.
8.
Receive the crosshatch signal from the Pattern Generator.
Press the MENU button. And, then press the Channel
UP/DOWN button on the remote control until the
PICTURE menu appears.
Press the VOL. UP/DOWN button on the remote control
to highlight DISPLAY FORMAT.
Press the Channel UP/DOWN button on the remote
control to select 1080i.
Set the screen mode to FULL.
Using the remote control, set the brightness and contrast
to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (16) on the remote control to
select “TRAPEZIUM”.
Press the VOL. UP/DOWN button on the remote control
until the both ends vertical lines of the screen become
parallel.
2-10: COR TOP/BTM
1.
2.
3.
4.
5.
6.
7.
Receive the crosshatch signal from the Pattern Generator.
Set the screen mode to FULL.
Using the remote control, set the brightness and contrast
to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (17) on the remote control to
select “COR. TOP”.
Press the VOL. UP/DOWN button on the remote control
until the both ends vertical lines become straight.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (18) on the remote control to
select “COR. BTM”.
Press the VOL. UP/DOWN button on the remote control
until the both ends vertical lines of the screen become
parallel.
Receive the crosshatch signal from the Pattern Generator.
Set the screen mode to FULL.
Using the remote control, set the brightness and contrast
to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (15) on the remote control to
select “E W PARA”.
Press the VOL. UP/DOWN button on the remote control
until the both ends vertical lines become straight.
Set the screen mode to 16:9.
Press the VOL. UP/DOWN button on the remote control
until the both ends vertical lines of the screen become
parallel.
2-8: E/W PARA
1.
2.
3.
4.
5.
6.
7.
2-11: BRIGHT CENT
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Receive the monoscope pattern. (RF Input)
Set the screen mode to FULL.
Using the remote control, set the brightness and contrast
to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (43) on the remote control to
select "BRI CENT".
Press the VOL. UP/DOWN button on the remote control
until the white 2.7% is starting to be visible
Receive the monoscope pattern. (VIDEO Input)
Press the INPUT button on the remote control to set to
the AV mode. Then perform the above adjustments 2~5.
Playback the DVD(480i ) disc. (COMPONENT Input)
Press the INPUT button on the remote control to set to
the YUV mode. Then perform the above adjustments
2~5.
Playback the DVD(480i) disc. (HDMI Input)
Press the INPUT button on the remote control to set to
the HDMI mode. Then perform the above adjustments
2~5.
Playback the DVD(480i) disc.
Press the TV/DVD button on the remote control to set to
the DVD mode.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (43) on the remote control to
select "BRI CENT".
Press the VOL. UP/DOWN button on the remote control
to set the same step numbers as the AV mode.
2-12: CENSOR SAW
1.
2.
3.
4.
5.
6.
7.
Receive the crosshatch signal from the Pattern Generator.
Press the MENU button. And, then press the Channel
UP/DOWN button on the remote control until the
PICTURE menu appears.
Press the VOL. UP/DOWN button on the remote control
to highlight DISPLAY FORMAT.
Press the Channel UP/DOWN button on the remote
control to select 1080i.
Set the screen mode to FULL.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (22) on the remote control to
select “C.SAW”.
Press the VOL. UP/DOWN button on the remote control
until the both ends vertical lines of the screen become
parallel.
