– 25 –
Installation Manual
Remove the front panel and then remove the cover of the electrical control box.
The cover of the electrical control box
Terminal block
(Power supply)
Earth screw
(Power supply)
Cord clamp
(Power supply)
Power supply wires
Communication wires
Terminal block
(Communication)
Earth screw
(Communication)
Cord clamp
(Communication)
Power supply wire connection
1. Insert the power supply wire through the cutout on the side of the electrical control box and connect the power
supply wire to the power supply terminal block and the earth line to the earth screw. After that, fix the power supply
wire with the cord clamp.
2. Use round-type crimping terminals for power connection.
Also, apply insulating sleeves to the crimping parts. Use a driver of appropriate size to fix the terminal screws.
* Design 60245 IEC66
Screw size and tightening torque
Wire size*
2.5 mm
2
Screw size
Tightening torque
(N•m)
Power supply terminal
M6
2.5 to 3.0
Earth screw
M8
5.5 to 6.6
L1
L2
L3
N
L
1
L
2
L
3
N
10 mm or more
Earth line
Power supply wire
60 mm or less
EN-49
EN-50
