15
English
Using the Controls
While all the necessary adjustments and controls for the television are made using the remote control,
the buttons on the television may be used control some functions.
ILLUSTRATION SHOWS 32L24.
HDMI 2 INPUT
SOCKET
Common Interface
USB
Headphone
Power
Up / down
(Volume or channel)
Programme / Volume / Source
RED LED - Standby
GREEN LED - Power on
Remote sensor
Switching On
If the RED Standby LED is unlit, check that the
plug is connected to the power supply. If the
picture does not appear press on the remote
control, it may take a few moments.
To put the television into Standby press on
the remote control. To view the television press
again. The picture may take a few seconds
to appear.
For energy saving:
We recommend that you use the television with
factory settings. These settings are designed
for energy saving. Unplugging the mains
plug will reduce energy use to zero. This is
recommended when the television is not being
used for long periods, e.g. when on holiday.
Reducing the brightness of the screen will
UHGXFHHQHUJ\XVH(QHUJ\HI¿FLHQF\UHGXFHV
energy consumption and can save money by
reducing electricity bills.
NOTE:
Putting the television into standby mode
will reduce energy consumption, but will
still draw some power.
Using the Remote Control
To set up the television you will now need to
use the on screen menus. Press
MENU
on the
remote control to see the menus.
7KHRQVFUHHQPHQXDSSHDUVDVDOLVWRI¿YH
topics. As each symbol is selected by pressing
ŻRUŹRQWKHQDYLJDWLRQULQJRQWKHUHPRWH
control.
To use the options, press
to enter the sub
PHQX7KHQSUHVVŸRUźRQWKHQDYLJDWLRQ
ring to move up and down through the menu
and use
to select the required choice. Follow
the on-screen instructions. The functions of
each menu are described in detail throughout
this manual.
Using the Controls on the TV
Press
to adjust volume.
Press
to change programme selection,
then press
to adjust programme selection.
Press and hold
until Source List is
displayed, then press
to scroll through
the list until desired input source is located.
3OHDVHDOZD\VUHIHUWRWKHRZQHU¶VPDQXDORI
WKHHTXLSPHQWWREHFRQQHFWHGIRUIXOOGHWDLOV
NOTE:
Inserting the headphone plug will mute
the sound from all speakers.
