IP
edge
& Strata CIX
Getting Started
6
TOSHIBA
IP4000-series UG November, 2011
Entering text on
the handset
To enter text in the handset (for example, entering a name in the contact list),
press the number key that corresponds to the letter you want to enter.
•
Press the key once to enter the first letter on the number key.
•
Press the key twice to enter the second letter, and three times to enter the
third.
•
Press the key a fourth time to enter the number on the key.
•
The list of letters for each key appears in the lower right corner of the display
so you can see what letter you are about to enter.
•
The handset uses capital letters as the first character and lower case letters
after that. To switch between upper case letter, lower case letters, and
numbers, press
#
.
•
To enter a symbol, press 1 to cycle through the available symbols or press
Symbol
and select the symbol you want to enter.
•
If two letters in a row use the same number key, enter the first letter. Wait for
the cursor to move to the next position, then enter the second letter.
•
Press
Select
or
Save
when you’re finished.
•
If you make a mistake while entering a name, move the cursor to right of the
incorrect character and press
Clear
. The handset deletes the character to
the left of the cursor (like the backspace key on a keyboard).
