22
• Serial baud rate 9600, 19200
-- OPTION --
BAUD RATE
9600
Move up down
By pushing
MENU UP, DOWN
Set by pushing
DATA UP, DOWN
( 6 ) Setting to factory setting status
All the settings can be returned to the factory default status (preset status).
(1) If characters are displayed on the screen, press the [DISP] button to disable the character display.
(2) Push [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second.
(3) The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed
for approx. 1 second.
(4. 5) Changing the shading correction mode
1
Set the "
→
" to SHAD. by pushing [MENU UP], [MENU DOWN] buttons.
2
Set the SHAD. by pushing [DATA UP], [DATA DOWN] buttons.
Note: The alignment value for shading is fixed to "0" when selecting SHAD. OFF. MANU is not dis-
played in the menu.
(4. 6) Changing the manual shading correction setting
1
Set the "
→
" to MANU by pushing [MENU UP], [MENU DOWN] buttons.
2
Set the MANUAL SHADING by pushing [DATA UP], [DATA DOWN] buttons.
( 5 ) OPTION
(5. 1) Changing serial communication baud rate
1
Set the "
→
" to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.
2
Select either 9600 or 19200 by pushing [DATA UP], [DATA DOWN] buttons.
