19
7. 2 Menus
1
Select the menu to change the setting by referring to the item “7.1 Using the Menus”.
2
When the [MENU UP], [MENU DOWN] buttons are pushed, the “
” on the screen moves up and down.
Move the “ ” to the item whose setting you wish to change.
3
Use the [DATA UP], [DATA DOWN] buttons to make changes.
( 1 ) SHUTTER (Electronic shutter)
The electronic shutter has three modes; AUTO, MANUAL, SS (Synchro. Scan).
Press the “Page” button to enter the Shutter Page. Use the “Data Up/Down” buttons to select the Shutter Mode.
MANUAL
SS
AUTO
AUTO
: The exposure time is controlled automatically to obtain the optimum video level.
MANUAL : It is possible to select the exposure time from eleven speed settings; OFF (at 1/60s: 59.94Hz setting
and 1/50s: 50Hz setting), 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, 1/2000s, 1/3000s, 1/4000s,
1/5000s, 1/10000s.
SS
: Shutter speed can be set by the horizontal scanning time (1H) unit.
Notes:
• If the shutter speed is increased, the sensitivity is decreased according to the speed. Flicker may occur under
discharge lamp lighting such as fluorescent tubes.
• If a fast-moving object is shot, its image may be distorted or blurred. Horizontal light-and-dark stripes may
appear on the screen under discharge lamp lighting such as fluorescent tubes. A light and dark difference may
appear on the screen according to the light emitting timing of flash or strobe. These phenomena are due to
rolling shutter system, not failures.
• When the shutter speed is set to high, the hue may change according to the shooting conditions and the
object.