1
FCC Compliance Statement
Notice to Users
:
This equipment has been tested and found to comply with the limits for a Class A digital device.
Pursuant to Part 15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
The equipment complies with the requirement of FCC CFR 47 PART 15 SUBPART B, Class A.
Explanation of Graphical Symbols
Warnings
}
Installation and servicing should be performed only by qualified and experienced personnel.
}
Power off the DVR when connecting cameras, audio, or sensor cables.
}
The manufacturer is not responsible for any damage caused by improper use of the product or failure to follow
instructions for the product.
}
The manufacturer is not responsible for any problems caused by or resulting from the user physically opening
the DVR for examination or attempting to fix the unit.
}
The manufacturer may not be held liable for any issues with the unit if any labels are removed in the product.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment
This symbol indicates the presence of important operating and
maintenance (servicing) instruction in the literature accompanying
the product.
This symbol indicates the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
