⎯
2
⎯
6 F 2 S 0 7 5 8
•
Current transformer circuit
Never allow the current transformer (CT) secondary circuit connected to this equipment to be
opened while the primary system is live. Opening the CT circuit will produce a dangerously high
voltage.
•
Exposed
terminals
Do not touch the terminals of this equipment while the power is on, as the high voltage generated
is dangerous.
•
Residual
voltage
Hazardous voltage can be present in the DC circuit just after switching off the DC power supply. It
takes approximately 30 seconds for the voltage to discharge.
•
Fiber
optic
When connecting this equipment via an optical fiber, do not look directly at the optical signal.
CAUTION
•
Earth
The earthing terminal of the equipment must be securely earthed.
CAUTION
•
Operating
environment
The equipment must only used within the range of ambient temperature, humidity and dust
detailed in the specification and in an environment free of abnormal vibration.
•
Ratings
Before applying AC voltage and current or the DC power supply to the equipment, check that they
conform to the equipment ratings.
•
Printed circuit board
Do not attach and remove printed circuit boards when the DC power to the equipment is on, as this
may cause the equipment to malfunction.
•
External
circuit
When connecting the output contacts of the equipment to an external circuit, carefully check the
supply voltage used in order to prevent the connected circuit from overheating.
•
Connection
cable
Carefully handle the connection cable without applying excessive force.
DANGER
WARNING
